Buy Luminous Off Grid Solar Inverter In India

Luminous Solar PCUs with Inbuilt MPPT Charge Controller are specially designed for Solar applications. These 1-Phase & 3-Phase PCUs are having high conversion feature. The DC Power generated from PV array is used to charge connected battery bank and also used to cater load through these PCUs. These PCUs being bi-directional have feature to charge batteries through grid also if Solar is not available.

Features

  • MPPT based PCUs
  • Inbuilt O/P isolation transformer
  • Bi-directional PCU
  • Selectable source priority
  • 32 bit DSP controller
  • MOSFET/IGBT switching element
  • MCB at battery and O/P Compliance to IEC standards

Technical specifications

  • Inbuilt MPPT charge controller with excellent conversion efficiency
  • Bi-Directional PCU with feature for battery charging through grid also
  • LCD display for local monitoring of system parameters, programming the desired settings and fault finding
  • Selectable source priority features to choose source priority as per availability and designed application
  • Advanced communication interface facilitates users to continuously monitor performance of installed system
System Rating (KW)

1KW

2KW

3KW

4KW

5KW

6KW

10KW

Photovoltaic Input  
MPPT Voltage 65V – 90V DC 130V – 160V DC

160V – 200V DC

Maximum Input Current (A)

15A*

30A*

46A

31A

38A

46A

63A

Maximum PV power recommended (KW)

1.1KW*

2.2KW*

3.3KW

4.4KW

5.5KW

6.6KW

11KW

No. of Charge Controller

1

MPPT Base Charge Controller  
Switching Element

MOSFET/IGBT

Type of Charger

PWM with MPPT

Grid Input  
Input Supply Phase

1 Phase 2 Wire

Nominal Voltage & Voltage Range

230VAC (+15%, -20%)

Battery  
Battery Voltage

48V

96V

120V

Battery recharge current setting range from Grid Side 9A*

19A*

28A

19A

23A

28A

36A

Battery recharge current setting range from Array Side

19A*

39A*

56A

37A

46A

56A

74A

Inverter  
Switching Element

MOSFET/IGBT

Control

32 Bit DSP controlled*

Nominal Output Voltage

230V AC L-N

Output Supply Phase

1 Phase 2 Wire

Output waveform

Sine wave

Nominal Frequency (Hz)

50 Hz

Power Factor (Within KVA/KW) 0.6 lag to 1 (Within KVA and KW rating)
Nominal Output Current (A)

4A

9A

13A

17A

22A

26A

44A

Voltage regulation

+/-2%

Voltage Stability in dynamic condition Complies with IEC/EN 62040-3, Class 1
Output voltage distortion with 100% linear load

< 2% *

Overload at nominal output voltage for 10 minutes

125%

Overload at nominal output voltage for 1 minute

150%

Inverter peak efficiency (Ref. STD IEC 61683)

Up to 90% *

Noise @ 1 meter (dBA +/-2dBA) <58dBA

<62dBA

Protection degree with open doors

IP20

Colour

RAL 7016 Texture

Dimension (WxDxH in mm) 250x620x500* 250x640x600

800x600x1100

Cooling

Forced Air

Galvanic Isolation Inbuilt isolation transformer at inverter output
Environment  
Location Indoor (Free from corrosive gases & conductive dust)
Temperature Operating

0-40 °C

Max. Relative humidity @25°C (non-condensing)

Up to 95%

Max. Altitude above sea level without de-rating (m)

1000 m

(For higher altitude complies with IEC/EN 62040 – 3)

Standard Compliance  
Testing IEC62040-1, 2, 3(for Safety, EMC Class, Testing) & IEC 60068-2(1,2,14,30)